General MedicationsOralHigh Alert

TNKase

TENECTEPLASE

Standard Dose

2 DOSAGE AND ADMINISTRATION TNKase is for intravenous administration only, administered as a single bolus over 5 seconds. ( 2.1 , 2.2 ) AIS Initiate treatment as soon as possible and within 3 hours after the onset of stroke symptoms. ( 2.1 ) Individualize dosage based on patient's weight; the maximum recommended dose is 25 mg (5 mL). ( 2.1 ) Acute STEMI Initiate treatment as soon as possible after the onset of STEMI symptoms. ( 2.2 ) Individualize dosage based on patient's weight; the maximum recommended dose is 50 mg (10 mL). ( 2.2 ) 2.1 Recommended Dosage for Acute Ischemic Stroke Initiate treatment as soon as possible and within 3 hours after the onset of stroke symptoms. TNKase is for intravenous (IV) administration only, administered as a single bolus over 5 seconds. Individualize dosage based on the patient's weight (see Table 1 ). The maximum recommended dose is 25 mg (5 mL). Table 1 Recommended Dosage for Acute Ischemic Stroke Patient Weight (kg) TNKase (mg) Volume TNKase to be administered (mL) less than 60 kg 15 mg 3 mL 60 kg to less than 70 kg 17.5 mg 3.5 mL 70 kg to less than 80 kg 20 mg 4 mL 80 kg to less than 90 kg 22.5 mg 4.5 mL 90 kg or more 25 mg 5 mL During and following TNKase administration for the treatment of acute ischemic stroke, frequently monitor and control blood pressure. In patients without recent use of oral anticoagulants or heparin, TNKase treatment can be initiated prior to the availability of coagulation study results. If the pretreatment International Normalized Ratio (INR) is greater than 1.7 or the activated partial thromboplastin time (aPTT) is elevated, closely monitor patients [see Contraindications (4) ]. 2.2 Recommended Dosage for Acute ST Elevation Myocardial Infarction Initiate treatment as soon as possible after the onset of STEMI symptoms. TNKase is for intravenous (IV) administration only, administered as a single bolus over 5 seconds. Individualize dosage based on the patient's weight (see Table 2 ). The maximum recommended dose is 50 mg (10 mL). Table 2 Recommended Dosage for Acute ST Elevation Myocardial Infarction Patient Weight (kg) TNKase (mg) Volume TNKase to be administered (mL) less than 60 kg 30 mg 6 mL 60 kg to less than 70 kg 35 mg 7 mL 70 kg to less than 80 kg 40 mg 8 mL 80 kg to less than 90 kg 45 mg 9 mL 90 kg or more 50 mg 10 mL 2.3 Preparation Follow the steps below to prepare TNKase for administration: Only use the supplied Sterile Water for Injection diluent vial for reconstitution as shown below. TNKase Vial Strength Sterile Water for Injection Vial Volume 25 mg 5.2 mL 50 mg 10 mL Using a sterile syringe, aseptically withdraw the Sterile Water for Injection from the diluent vial and reconstitute the TNKase vial by directing the stream into the lyophilized powder to obtain a final concentration of 5 mg/mL. Slight foaming upon reconstitution is not unusual; any large bubbles will dissipate if the product is allowed to stand undisturbed for several minutes. Gently swirl until contents are completely dissolved. DO NOT SHAKE. The reconstituted preparation results in a colorless to pale yellow transparent solution. Determine the appropriate dose of TNKase [see Dosage and Administration (2.1 , 2.2) ] and withdraw the required volume (in milliliters) from the reconstituted vial into the syringe. Discard any unused solution. 2.4 Administration Follow the steps below for administration of TNKase: Visually inspect the reconstituted product in the syringe for particulate matter and discoloration prior to administration. Precipitation may occur when TNKase is administered in an intravenous line containing dextrose. Flush dextrose-containing lines with 0.9% Sodium Chloride Injection solution prior to and following single bolus administration of TNKase. Using sterile technique, connect the syringe directly to the intravenous port. Administer reconstituted TNKase as a single intravenous bolus over 5 seconds. Because TNKase contains no antibacterial preservatives, reconstitute immediately before use. If the reconstituted TNKase is not used immediately, refrigerate the TNKase vial at 2°C to 8°C (36°F to 46°F) and use within 8 hours. Dispose of the syringe per established procedures. 2.5 Chemical Incompatibilities TNKase is incompatible with dextrose containing solutions. When used together, precipitation may occur. Flush dextrose containing lines with 0.9% Sodium Chloride Injection solution before using TNKase.

Max Dose

See official label

Primary Use

1 INDICATIONS AND USAGE TNKase is a tissue plasminogen activator (tPA) indicated: for the treatment of acute ischemic stroke (AIS) in adults.

Summary

Dosage and administration 2 DOSAGE AND ADMINISTRATION TNKase is for intravenous administration only, administered as a single bolus over 5 seconds. ( 2.1 , 2.2 ) AIS Initiate treatment as soon as possible and within 3 hours after the onset of stroke symptoms. ( 2.1 ) Individualize dosage based on patient's weight; the maximum recommended dose is 25 mg (5 mL). ( 2.1 ) Acute STEMI Initiate treatment as soon as possible after the onset of STEMI symptoms. ( 2.2 ) Individualize dosage based on patient's weight; the maximum recommended dose is 50 mg (10 mL). ( 2.2 ) 2.1 Recommended Dosage for Acute Ischemic Stroke Initiate treatment as soon as possible and within 3 hours after the onset of stroke symptoms.

Structured Monograph

Clinical summary

Indications and usage 1 INDICATIONS AND USAGE TNKase is a tissue plasminogen activator (tPA) indicated: for the treatment of acute ischemic stroke (AIS) in adults. ( 1.1 ) to reduce the risk of death associated with acute ST elevation myocardial infarction (STEMI) in adults. ( 1.2 ) 1.1 Acute Ischemic Stroke TNKase is indicated for the treatment of acute ischemic stroke (AIS) in adults. 1.2 Acute ST Elevation Myocardial Infarction TNKase is indicated to reduce the risk of death associated with acute ST elevation myocardial infarction (STEMI) in adults. Dosage and administration 2 DOSAGE AND ADMINISTRATION TNKase is for intravenous administration only, administered as a single bolus over 5 seconds. ( 2.1 , 2.2 ) AIS Initiate treatment as soon as possible and within 3 hours after the onset of stroke symptoms. ( 2.1 ) Individualize dosage based on patient's weight; the maximum recommended dose is 25 mg (5 mL). ( 2.1 ) Acute STEMI Initiate treatment as soon as possible after the onset of STEMI symptoms. ( 2.2 ) Individualize dosage based on patient's weight; the maximum recommended dose is 50 mg (10 mL). ( 2.2 ) 2.1 Recommended Dosage for Acute Ischemic Stroke Initiate treatment as soon as possible and within 3 hours after the onset of stroke symptoms. TNKase is for intravenous (IV) administration only, administered as a single bolus over 5 seconds. Individualize dosage based on the patient's weight (see Table 1 ). The maximum recommended dose is 25 mg (5 mL). Table 1 Recommended Dosage for Acute Ischemic Stroke Patient Weight (kg) TNKase (mg) Volume TNKase to be administered (mL) less than 60 kg 15 mg 3 mL 60 kg to less than 70 kg 17.5 mg 3.5 mL 70 kg to less than 80 kg 20 mg 4 mL 80 kg to less than 90 kg 22.5 mg 4.5 mL 90 kg or more 25 mg 5 mL During and following TNKase administration for the treatment of acute ischemic stroke, frequently monitor and control blood pressure. In patients without recent use of oral anticoagulants or heparin, TNKase treatment can be initiated prior to the availability of coagulation study results. If the pretreatment International Normalized Ratio (INR) is greater than 1.7 or the activated partial thromboplastin time (aPTT) is elevated, closely monitor patients [see Contraindications (4) ]. 2.2 Recommended Dosage for Acute ST Elevation Myocardial Infarction Initiate treatment as soon as possible after the onset of STEMI symptoms. TNKase is for intravenous (IV) administration only, administered as a single bolus over 5 seconds. Individualize dosage based on the patient's weight (see Table 2 ). The maximum recommended dose is 50 mg (10 mL). Table 2 Recommended Dosage for Acute ST Elevation Myocardial Infarction Patient Weight (kg) TNKase (mg) Volume TNKase to be administered (mL) less than 60 kg 30 mg 6 mL 60 kg to less than 70 kg 35 mg 7 mL 70 kg to less than 80 kg 40 mg 8 mL 80 kg to less than 90 kg 45 mg 9 mL 90 kg or more 50 mg 10 mL 2.3 Preparation Follow the steps below to prepare TNKase for administration: Only use the supplied Sterile Water for Injection diluent vial for reconstitution as shown below. TNKase Vial Strength Sterile Water for Injection Vial Volume 25 mg 5.2 mL 50 mg 10 mL Using a sterile syringe, aseptically withdraw the Sterile Water for Injection from the diluent vial and reconstitute the TNKase vial by directing the stream into the lyophilized powder to obtain a final concentration of 5 mg/mL. Slight foaming upon reconstitution is not unusual; any large bubbles will dissipate if the product is allowed to stand undisturbed for several minutes. Gently swirl until contents are completely dissolved. DO NOT SHAKE. The reconstituted preparation results in a colorless to pale yellow transparent solution. Determine the appropriate dose of TNKase [see Dosage and Administration (2.1 , 2.2) ] and withdraw the required volume (in milliliters) from the reconstituted vial into the syringe. Discard any unused solution. 2.4 Administration Follow the steps below for administration of TNKase: Visually inspect the reconstituted product in the syringe for particulate matter and discoloration prior to administration. Precipitation may occur when TNKase is administered in an intravenous line containing dextrose. Flush dextrose-containing lines with 0.9% Sodium Chloride Injection solution prior to and following single bolus administration of TNKase. Using sterile technique, connect the syringe directly to the intravenous port. Administer reconstituted TNKase as a single intravenous bolus over 5 seconds. Because TNKase contains no antibacterial preservatives, reconstitute immediately before use. If the reconstituted TNKase is not used immediately, refrigerate the TNKase vial at 2°C to 8°C (36°F to 46°F) and use within 8 hours. Dispose of the syringe per established procedures. 2.5 Chemical Incompatibilities TNKase is incompatible with dextrose containing solutions. When used together, precipitation may occur. Flush dextrose containing lines with 0.9% Sodium Chloride Injection so

Monitoring

• 5 WARNINGS AND PRECAUTIONS Bleeding: Increases the risk of bleeding.
• Avoid intramuscular injections.
• Monitor for bleeding.
• ( 5.1 ) Hypersensitivity: Monitor patients treated with TNKase during and for several hours after administration.

Interaction Notes

• 7 DRUG INTERACTIONS During TNKase therapy, results of coagulation tests and/or measures of fibrinolytic activity may be unreliable unless specific precautions are taken to prevent in vitro artifacts.
• ( 7.1 ) 7.1 Drug/Laboratory Test Interactions During TNKase therapy, results of coagulation tests and/or measures of fibrinolytic activity may be unreliable unless specific precautions are taken to prevent in vitro artifacts.
• Tenecteplase is an enzyme that, when present in blood in pharmacologic concentrations, remains active under in vitro conditions.
• This can lead to degradation of fibrinogen in blood samples removed for analysis.